Kitchen Hood Cleaning New York for restaurant owners is so important to keep the efficiency of the
exhaust system. The hood is especially meant for 2 things, first is for fire
protection by getting rid of the grease. Next is to get rid of the smoke as
well as the heat from the cooking area underneath. The kitchen exhaust system
is especially meant to pull the grease laden smoke up to the hood and to the
filters where it will be filtered. It will be turned back into grease and then
it will be emptied through the tray. There are 3 basic designs of hoods; these
are the canopy, the down draft and the galley. The closer the hood to the
cooking surface, the better it is. The hood is where the first filtration of
the smoke occurs. The size of the hood will depend much on the kind of cooking
tool and the size of the equipment that will be used.
There are 2
kinds of commercial hoods in the restaurants, first is the type 1 which is used
over the grease emitting equipment. According to the regulations, the hoods
should be welded in a continuous manner and it must also be suspended by
non-combustible hangers. The type 2 hoods might be used over by the appliances
that can only come up steam, odors and fumes only. They will not require the
filters. It will be a restaurant hood cleaning firm that will be responsible in
handling this case. They will be the one to tell the owner of the restaurant
about the grease producing equipment which is not fire safe due to the material
used.
No comments:
Post a Comment